Hydraulic 1.5/ 1.6 Roller Gen II LT4 Hot Camshaft For All V-8 Engines With Roller Cams
£599.36
(No reviews yet)
Write a Review
Hydraulic 1.5/ 1.6 Roller Gen II LT4 Hot Camshaft For All V-8 Engines With Roller Cams
Duration @ .050" Lift (deg): Intake: 218 / Exhaust:228
Maximum Lift (in) w/1.5 rocker: Intake: .492 / Exhaust: .492
Maximum Lift (in) w/1.6 rocker: Intake: .525 / Exhaust: .525
Lobe Centerline (deg): 112
Technical Notes: Service only, for all V-8 engines with roller cams (see note below)
NOTE: The Gen II LT4 camshaft P/N 24502586 was designed to be used in many different engines. The following change may be necessary for correct engine assembly: For LT1 and L98 engines (pre-1996) the dowel pin in the end of the camshaft must be pushed in so extension from end of cam is .30"+/- .01". For 1996 LT1 and LT4 engines, the dowel pin is in the correct position extending .620" from the end of the camshaft. This cam has a fuel pump lobe.
