SERPENTINE KIT - FEAD CTS-V -19370810
CTS-V Accessory Drive System – with A/C - Fixed Displacement Compressor
The easiest and most convenient way to finish your LS engine and get it ready to run in your vehicle is with one of our serpentine accessory drive systems. They include the accessories, brackets, drive belts and hardware your engine needs, saving you the time of sourcing them individually. They’re all-inclusive systems that bolt right onto the engine for a factory fit and appearance.
- Does not work on LS9 and LSA supercharged engines
- Most harmonic balancers do not line up correctly with the accessory drive system; damper P/N 12674582 is strongly recommended
- Air conditioning has separate belt; to delete air conditioning, do not install the belt, compressor or tensioner
- Fits all LS type engines, except production iron block applications
- Direct bolt-on for LS3 and LS7 engines
NOTE: Will not work with a cam-phased engine.
NOTE: Will not work on LS327 with cast-iron block.
NOTE: Water pump P/N 12710208 NOT included with kit.
NOTE: Includes fixed displacement compressor
NOTE: Use P/N 19299069 for A/C add-on if Variable DisplacementCompressor is needed.
KIT CONTAINS :
BRACKET - AIR CONDITIONING
BOLT - M10X1.5X40MM - 15MM DRIVE
COMPRESSOR - AIR CONDITIONING
BOLT - M10X1.5X90MM - 15MM DRIVE
TENSIONER - AIR CONDTIONING BELT
BELT - AIR CONDITIONING COMPRESSOR
BRACKET - POWER STEERING PUMP
BOLT - M10X1.5X75MM - 15MM DRIVE
PUMP - POWER STEERING
PULLEY - POWER STEERING PUMP
BOLT - M8X1.25X25MM- 10MM DRIVE
RESERVOIR - POWER STEERING FLUID
HOSE - POWER STEERING FLUID RESERVOIR WITH CLAMPS
BOLT - M8X1.25X40MM - 13MM DRIVE
BRACKET - GENERATOR
BRACKET - GENERATOR
GENERATOR
BOLT - M10X1.5X60.5MM - 15MM DRIVE
PULLEY - BELT IDLER
TENSIONER - DRIVE BELT
BELT - WATER PUMP/GENERATOR/ POWER STEERING